| ABSA |
SPLINE QUANTITY |
6 BOTH ENDS |
| AGJS |
PITCH DIAMETER |
6.0000 INCHES NOMINAL |
| CWTX |
HUB NOMINAL DIAMETER |
2.997 INCHES SECOND END |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.937 INCHES SECOND END |
| CWMW |
TEETH TYPE |
SINGLE HELIX |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
1.5025 INCHES BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
2.9965 INCHES FIRST END |
| AAQL |
BODY STYLE |
WEBBED, SOLID |
| TMQY |
FURNISHED ITEMS AND QUANTITY |
1 PLUG |
| CWWH |
END NOMINAL LENGTH |
1.3750 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
6.2840 INCHES |
| MATT |
MATERIAL |
STEEL OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-890,CLASS B MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWNM |
TOOTH DIRECTION |
RIGHT |
| CBBL |
FEATURES PROVIDED |
SPECIAL MARKING AND LUBRICATION HOLE |
| CQFM |
HARDNESS RATING |
90.0 ROCKWELL C MINIMUM OVERALL AND 94.0 ROCKWELL C MAXIMUM OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
1.500 INCHES |
| ANTP |
BORE STYLE |
STRAIGHT SPLINE BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
2.312 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
2.3125 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.9375 INCHES FIRST END |
| CWPZ |
HELIX ANGLE |
27.3217 DEGREES |
| AJLA |
TEETH QUANTITY |
30 |
| CWNH |
TOOTH FORM |
STANDARD |