| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| FEAT |
SPECIAL FEATURES |
MOUNTING FACILITY SCREW THREAD DIAMETER CAN ALSO BE 40 |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES AXIALLY THROUGH BODY, FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWRM |
FACE NOMINAL WIDTH |
0.156 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.406 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.040 INCHES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| AGJS |
PITCH DIAMETER |
3.0000 INCHES NOMINAL |
| AJLA |
TEETH QUANTITY |
144 |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
3 THREADED AXIALLY THROUGH BODY, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
0.468 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.188 INCHES BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
0.750 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL AND CHROMATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |