| CWRM |
FACE NOMINAL WIDTH |
1.000 INCHES |
| CWTX |
HUB NOMINAL DIAMETER |
1.875 INCHES SECOND END |
| AJLA |
TEETH QUANTITY |
36 |
| CWFR |
NOMINAL OVERALL LENGTH |
1.641 INCHES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CQFM |
HARDNESS RATING |
33.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.687 INCHES SECOND END |
| CWMW |
TEETH TYPE |
STRAIGHT |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.2660 INCHES FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
1.414 INCHES BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232,TYPE Z,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE OVERALL AND MIL-P-16232,TYPE M,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWQD |
PITCH ANGLE |
45.0000 DEGREES |
| ABSA |
SPLINE QUANTITY |
21 BOTH ENDS |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL AND PHOSPHATE ZINC OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66,AISI/SAE 1330H,8630H,4130H FED STD SINGLE MATERIAL RESPONSE OVERALL |
| BDTX |
SPLINE PITCH DIAMETER |
1.3125 INCHES NOMINAL BOTH ENDS |
| AGJS |
PITCH DIAMETER |
4.5000 INCHES NOMINAL |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
4.6770 INCHES |
| MATT |
MATERIAL |
STEEL COMP 8630H OVERALL AND STEEL COMP 1330H OVERALL AND STEEL COMP 4130H OVERALL |
| STYL |
STYLE DESIGNATOR |
PERIPHERAL FACE, BACK HUB PROTRUDING |