| MATL |
MATERIAL |
STEEL, MIL-S-16113, TYPE 1, GRADE M |
| AQPL |
FACE WIDTH |
0.459 INCHES NOMINAL |
| AGJS |
PITCH DIAMETER |
16.001 INCHES NOMINAL |
| ABSA |
SPLINE QUANTITY |
6 |
| ABHE |
OUTSIDE DIAMETER |
16.433 INCHES NOMINAL |
| BXSJ |
LIGHTENING HOLE |
NOT INCLUDED |
| ARJD |
DESIGN FORM |
PLAIN |
| BYGF |
TOOTH PITCH |
0.750 INCHES NOMINAL |
| AQWM |
GUIDE |
NOT INCLUDED |
| ABHP |
OVERALL LENGTH |
1.875 INCHES NOMINAL |
| BSNP |
SECURING METHOD |
DRILLED HOLE |
| BYFH |
BELT/CHAIN/FILM SIZE FOR WHICH DESIGNED |
ROLLER CHAIN |
| BYFJ |
ROLLER CHAIN PITCH TYPE FOR WHICH DESIGNED |
SINGLE PITCH |
| ASBP |
BORE TYPE |
STRAIGHT SPLINE |
| BYZD |
HUB END OUTSIDE DIAMETER AND LOCATION |
3.500 INCHES INNER NEEDLE PEAK |
| BYFW |
HUB EXTERNAL KEYWAY |
NOT INCLUDED |
| AXFH |
SPLINE LENGTH |
1.875 INCHES NOMINAL |
| AXND |
COUNTERBORE FEATURE |
NOT INCLUDED |
| BYFL |
TEETH ROW QUANTITY |
1 |
| ABSC |
SPLINE MINOR DIAMETER |
2.032 INCHES MINIMUM AND 2.034 INCHES MAXIMUM |
| AHYF |
SECURING HOLE QUANTITY |
2 |
| STYL |
STYLE DESIGNATOR |
PLAIN |
| BYDZ |
PROTRUDING HUB CHARACTERISTIC |
PLAIN |
| BSGG |
KEYING FACILITY |
NOT INCLUDED |
| AAUJ |
SPLINE MAJOR DIAMETER |
2.247 INCHES MINIMUM AND 2.249 INCHES MAXIMUM |
| BYFS |
BORE BEARING |
NOT INCLUDED |
| BYZF |
DISTANCE FROM OUTSIDE FLANGE/RIM TO HUB END AND LOCATION |
1.416 INCHES NOMINAL BOTH ENDS |
| BYFN |
TEETH QUANTITY PER ROW |
67 |
| BYFQ |
HARDNESS RATING TEST METHOD |
NOT RATED |
| AGGP |
DRILLED HOLE DIAMETER |
0.252 INCHES NOMINAL |
| BFYT |
HOLE LOCATION |
ON HUB,0.625 IN. FROM END THRU CENTER OF SPLINE |