| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.1090 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
OXIDE OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.562 INCHES SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.625 INCHES BOTH ENDS |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWRM |
FACE NOMINAL WIDTH |
0.375 INCHES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| AJLA |
TEETH QUANTITY |
38 |
| CWMW |
TEETH TYPE |
STRAIGHT |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM TEETH AND 52.0 ROCKWELL C MAXIMUM TEETH |
| AGJS |
PITCH DIAMETER |
2.3750 INCHES NOMINAL |
| CWRX |
BORE NOMINAL DEPTH |
0.938 INCHES BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.461 INCHES |
| MATT |
MATERIAL |
STEEL OVERALL |
| CWFR |
NOMINAL OVERALL LENGTH |
1.047 INCHES |
| FEAT |
SPECIAL FEATURES |
DISTANCE FROM SECOND END OF HUB TO CENTER OF TAPPED HOLE 0.250 NOM IN. |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES AND 45.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED SECOND END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
1.000 INCHES SECOND END |
| STYL |
STYLE DESIGNATOR |
PERIPHERAL FACE, BACK HUB PROTRUDING |