| CWWH |
END NOMINAL LENGTH |
0.281 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
ANODIZE BODY |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.232 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL COMP 303SE BODY |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALLOY ALCLAD 2024,T4 FED SPEC ALL MATERIAL RESPONSES TEETH |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.090 INCHES BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
0.188 INCHES SECOND END |
| ABSX |
ATTACHMENT METHOD |
CLAMP |
| CWWN |
END NOMINAL DIAMETER |
0.125 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.081 INCHES |
| AJLA |
TEETH QUANTITY |
128 |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.018 INCHES SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.513 INCHES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE TEETH |
| AGJS |
PITCH DIAMETER |
1.0647 INCHES MINIMUM AND 1.0657 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.313 INCHES FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 TEETH AND ALUMINUM ALLOY 1230 TEETH |
| FEAT |
SPECIAL FEATURES |
SPLIT TYPE HUB |
| CWNH |
TOOTH FORM |
STANDARD |