| CWWH |
END NOMINAL LENGTH |
0.125 INCHES SECOND END |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 12 |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.250 INCHES SECOND END |
| CWRM |
FACE NOMINAL WIDTH |
0.096 INCHES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.187 INCHES |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM TEETH |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP BOTH ENDS |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T6 FED SPEC 1ST MATERIAL RESPONSE TEETH |
| CWFR |
NOMINAL OVERALL LENGTH |
0.376 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 TEETH |
| AJLA |
TEETH QUANTITY |
74 |
| MATT |
MATERIAL |
STEEL COMP 416 HUB |
| AGJS |
PITCH DIAMETER |
1.1555 INCHES MINIMUM AND 1.1562 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,COND T FED SPEC 2ND MATERIAL RESPONSE HUB |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.140 INCHES BOTH ENDS |
| CWWN |
END NOMINAL DIAMETER |
0.187 INCHES SECOND END |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM HUB AND 32.0 ROCKWELL C MAXIMUM HUB |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.015 INCHES FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE HUB |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.015 INCHES SECOND END |
| CWWH |
END NOMINAL LENGTH |
0.125 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |