| CWWH |
END NOMINAL LENGTH |
0.125 INCHES SECOND END |
| CWRS |
BORE NOMINAL DIAMETER |
0.168 INCHES BOTH ENDS |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 12 |
| AGJS |
PITCH DIAMETER |
0.3233 INCHES MINIMUM AND 0.3240 INCHES MAXIMUM |
| ABSA |
SPLINE QUANTITY |
8 BOTH ENDS |
| BDTX |
SPLINE PITCH DIAMETER |
0.1667 INCHES NOMINAL BOTH ENDS |
| CWRM |
FACE NOMINAL WIDTH |
0.096 INCHES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.343 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.149 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.135 INCHES SECOND END |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP BOTH ENDS |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.010 INCHES SECOND END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.505 INCHES |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 416,COND T FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.274 INCHES FIRST END |
| CWTB |
COUNTERBORE NOMINAL DEPTH |
0.349 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
20 |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| CWWN |
END NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.281 INCHES BOTH ENDS |
| CWTG |
COUNTERBORE NOMINAL DIAMETER |
0.192 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.125 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |