| AJLA |
TEETH QUANTITY |
42 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWWH |
END NOMINAL LENGTH |
0.032 INCHES SECOND END |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| AGJS |
PITCH DIAMETER |
0.8750 INCHES NOMINAL |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.311 INCHES SECOND END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.500 INCHES SECOND END |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| CWFR |
NOMINAL OVERALL LENGTH |
0.564 INCHES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.141 INCHES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.9050 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 6,TYPE C FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM OVERALL AND 30.0 ROCKWELL C MAXIMUM OVERALL |
| CWWN |
END NOMINAL DIAMETER |
0.314 INCHES SECOND END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END AND 2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| STYL |
STYLE DESIGNATOR |
PERIPHERAL FACE, BACK HUB PROTRUDING |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.343 INCHES SECOND END |