| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.219 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| AGJS |
PITCH DIAMETER |
0.4580 INCHES NOMINAL |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| AJLA |
TEETH QUANTITY |
22 |
| CWFR |
NOMINAL OVERALL LENGTH |
0.406 INCHES |
| MATT |
MATERIAL |
STEEL COMP 303SE OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.187 INCHES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CQFM |
HARDNESS RATING |
75.0 ROCKWELL B MINIMUM OVERALL AND 83.0 ROCKWELL B MAXIMUM OVERALL |
| CWTX |
HUB NOMINAL DIAMETER |
0.375 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.500 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-7720,COMP 303SE MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.188 INCHES BOTH ENDS |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
40 TRANSVERSELY THROUGH HUB, FIRST END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |