| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.437 INCHES |
| AGJS |
PITCH DIAMETER |
0.8320 INCHES MINIMUM AND 0.8330 INCHES MAXIMUM |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.187 INCHES |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| BDZQ |
BACKLASH DESIGNATION |
GRADE C |
| FEAT |
SPECIAL FEATURES |
MTG HOLES 90 DEGS APART |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.874 INCHES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.250 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
40 |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| TMQY |
FURNISHED ITEMS AND QUANTITY |
1 SETSCREW |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END AND 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 |
| CWNH |
TOOTH FORM |
STANDARD |