| AGJS |
PITCH DIAMETER |
1.3750 INCHES NOMINAL |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC AXIALLY THROUGH BODY, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.625 INCHES BOTH ENDS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.312 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.164 INCHES AXIALLY THROUGH BODY, FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
3 THREADED AXIALLY THROUGH BODY, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.416 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.312 INCHES FIRST END |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
1.000 INCHES AXIALLY THROUGH BODY, FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 AXIALLY THROUGH BODY, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.437 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| AJLA |
TEETH QUANTITY |
66 |
| CWWN |
END NOMINAL DIAMETER |
0.749 INCHES FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.125 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |