| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.244 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
0.9500 INCHES NOMINAL |
| CWRS |
BORE NOMINAL DIAMETER |
0.120 INCHES BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.306 INCHES |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.625 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.975 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWRM |
FACE NOMINAL WIDTH |
0.062 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| AJLA |
TEETH QUANTITY |
76 |
| FEAT |
SPECIAL FEATURES |
W/0.032 IN. DIA HOLE,0.093 IN. DEEP,COUNTERSUNK 90 DEG TO 0.062 IN. DIA.,LOCATED 0.215 IN. FROM CENTER OF BORE,W/O.500 IN. DIA. BY 0.030 IN. LG UNDERCUT IN STEP AT RIGHT ANGLE TO BORE |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.125 INCHES FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.218 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.119 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |