| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWYD |
FIRST GROOVE NOMINAL DIAMETER |
0.203 INCHES FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CWYW |
SECOND GROOVE NOMINAL DIAMETER |
0.198 INCHES FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.125 INCHES SECOND END |
| CWYR |
SECOND GROOVE NOMINAL WIDTH |
0.010 INCHES FIRST END |
| CWXY |
FIRST GROOVE NOMINAL WIDTH |
0.017 INCHES FIRST END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.275 INCHES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END |
| AAQL |
BODY STYLE |
WEBBED, SOLID |
| MATT |
MATERIAL |
ALUMINUM ALLOY OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.090 INCHES BOTH ENDS |
| AGJS |
PITCH DIAMETER |
0.8000 INCHES NOMINAL |
| CWTR |
HUB STYLE DESIGNATOR |
2 GROOVES FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| AJLA |
TEETH QUANTITY |
64 |
| CWRM |
FACE NOMINAL WIDTH |
0.062 INCHES |
| CWZC |
NOMINAL DISTANCE FROM END TO SECOND GROOVE |
0.078 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
0.218 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.088 INCHES FIRST END |
| CWYL |
NOMINAL DISTANCE FROM END TO FIRST GROOVE |
0.037 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.825 INCHES |
| CWNH |
TOOTH FORM |
STANDARD |