| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE HUB |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.250 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AGJS |
PITCH DIAMETER |
1.5833 INCHES NOMINAL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWWN |
END NOMINAL DIAMETER |
0.312 INCHES FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.156 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 BODY |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.625 INCHES |
| AJLA |
TEETH QUANTITY |
76 |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.062 INCHES SECOND END |
| CWTX |
HUB NOMINAL DIAMETER |
0.312 INCHES SECOND END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 HUB |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE TEETH |
| CWWH |
END NOMINAL LENGTH |
0.031 INCHES FIRST END |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 TEETH |
| CWRS |
BORE NOMINAL DIAMETER |
0.190 INCHES BOTH ENDS |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.187 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |