| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| AJLA |
TEETH QUANTITY |
100 |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.437 INCHES FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| CWFR |
NOMINAL OVERALL LENGTH |
0.335 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.218 INCHES FIRST END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
2.0833 INCHES NOMINAL |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.123 INCHES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.250 INCHES BOTH ENDS |
| FEAT |
SPECIAL FEATURES |
DRILL ONE HOLE 0.375 IN.DIA,0.500 IN.FROM CENTER OF BORE,151 DEG 38 MINUTES FROM ALIGNMENT HOLE |
| CWNH |
TOOTH FORM |
STANDARD |