| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.333 INCHES |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.234 INCHES FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.250 INCHES |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| MATT |
MATERIAL |
COPPER ALLOY OVERALL |
| CWWH |
END NOMINAL LENGTH |
0.265 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.625 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.500 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWRS |
BORE NOMINAL DIAMETER |
0.313 INCHES BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-B-18343 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
54 |
| FEAT |
SPECIAL FEATURES |
MTG HOLES 90 DEGS APART CENTERED ON FIRST END STEP |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| AGJS |
PITCH DIAMETER |
2.2500 INCHES NOMINAL |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.164 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.500 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| TMQY |
FURNISHED ITEMS AND QUANTITY |
2 SETSCREW |
| STYL |
STYLE DESIGNATOR |
ONE PROTRUDING HUB, ONE FLUSH HUB |
| CWTX |
HUB NOMINAL DIAMETER |
0.750 INCHES SECOND END |
| CWNH |
TOOTH FORM |
STANDARD |