| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN SECOND END |
| CWRM |
FACE NOMINAL WIDTH |
0.188 INCHES |
| AJLA |
TEETH QUANTITY |
72 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,COND H,CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| CQFM |
HARDNESS RATING |
28.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUBS |
| CWTX |
HUB NOMINAL DIAMETER |
0.375 INCHES SECOND END |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWWN |
END NOMINAL DIAMETER |
0.562 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.312 INCHES |
| AGJS |
PITCH DIAMETER |
2.2500 INCHES NOMINAL |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 PLAIN TRANSVERSELY THROUGH HUB, FIRST END AND 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWRS |
BORE NOMINAL DIAMETER |
0.312 INCHES BOTH ENDS |
| CWWH |
END NOMINAL LENGTH |
0.203 INCHES FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
2.195 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.047 INCHES SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.015 INCHES FIRST END |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171,FINISH NO.5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.812 INCHES FIRST END |
| CWNH |
TOOTH FORM |
STANDARD |