| CWXY |
FIRST GROOVE NOMINAL WIDTH |
0.029 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
0.5833 INCHES NOMINAL |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
56 TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| AJLA |
TEETH QUANTITY |
70 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.600 INCHES |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWYL |
NOMINAL DISTANCE FROM END TO FIRST GROOVE |
0.134 INCHES FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.055 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.090 INCHES BOTH ENDS |
| CWFR |
NOMINAL OVERALL LENGTH |
0.280 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWTX |
HUB NOMINAL DIAMETER |
0.250 INCHES FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.225 INCHES FIRST END |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
1 GROOVE FIRST END |
| CWYD |
FIRST GROOVE NOMINAL DIAMETER |
0.232 INCHES FIRST END |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 303,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |