| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A322 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR ASTM-A331 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| AJLA |
TEETH QUANTITY |
22 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN BOTH ENDS |
| AGJS |
PITCH DIAMETER |
2.5000 INCHES NOMINAL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| AGAV |
END ITEM IDENTIFICATION |
F-15 A/C ACFT |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| ABSA |
SPLINE QUANTITY |
15 SECOND END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.570 INCHES FIRST END |
| CWMW |
TEETH TYPE |
STRAIGHT |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.100 INCHES SECOND END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.660 INCHES |
| CWQD |
PITCH ANGLE |
45.0000 DEGREES |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| CWTX |
HUB NOMINAL DIAMETER |
0.740 INCHES FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.900 INCHES |
| CWRS |
BORE NOMINAL DIAMETER |
0.530 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.670 INCHES SECOND END |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 4140 OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.400 INCHES |
| STYL |
STYLE DESIGNATOR |
SIDE FACE, PROTRUDING HUBS |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE SECOND END |
| BDTX |
SPLINE PITCH DIAMETER |
0.4688 INCHES NOMINAL SECOND END |