| CFFQ |
WORM BODY TAPERED BEARING SURFACE END |
NOT PROVIDED |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| CFFM |
SHAFT HARDNESS RATING |
34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CFGC |
UNTHREADED SECTION PIN HOLE DIAMETER |
0.0400 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFF |
WORM PRESSURE ANGLE IN DEG |
14.500 |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.430 INCHES NOMINAL FIRST END |
| ABHP |
OVERALL LENGTH |
1.960 INCHES NOMINAL |
| MATL |
MATERIAL |
STEEL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.351 INCHES NOMINAL FIRST END |
| FEAT |
SPECIAL FEATURES |
THREE 0.096 IN. DIA MOUNTING HOLES SPACED 120 DEG APART ON FIRST END AND FOUR 0.040 IN. DIA MOUNTING HOLES SPACED 0.330 IN. C TO C ON SECOND END |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.270 INCHES NOMINAL SECOND END |
| CFFK |
WORM OUTSIDE DIAMETER |
0.375 INCHES NOMINAL |
| CFFB |
WORM THREAD QUANTITY |
1 |
| CFFC |
WORM THREAD LEAD |
0.066 INCHES NOMINAL |
| CFGC |
UNTHREADED SECTION PIN HOLE DIAMETER |
0.0960 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFL |
WORM PITCH DIAMETER |
0.335 INCHES NOMINAL |
| CFFG |
WORM HELIX ANGLE |
3 DEG 34 MIN |
| SURF |
SURFACE TREATMENT |
PHOSPHATE |
| BYFR |
TEETH HARDNESS RATING |
34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.760 INCHES NOMINAL SECOND END |
| CFFD |
WORM THREAD DIRECTION |
RIGHT-HAND |
| CFFW |
SHAFT LOCATION |
BOTH ENDS OF WORM |