| BDSR |
SECOND END SPLINE QUANTITY |
11 |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMGF |
SECOND END PITCH DIAMETER |
0.3358 INCHES NOMINAL |
| AMDR |
FIRST END PRESSURE ANGLE |
30.0 DEGREES NOMINAL |
| AMGA |
SECOND END SPLINE LENGTH |
0.6400 INCHES NOMINAL |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AMDM |
FIRST END SPLINE LENGTH |
0.4800 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
SPLINED (INVOLUTE) |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.2942 INCHES MINIMUM AND 0.3023 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE |
| CSPY |
LARGEST STEP DIAMETER |
0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| BDSQ |
FIRST END SPLINE QUANTITY |
11 |
| AAHP |
SECOND END STYLE |
SPLINED (INVOLUTE) |
| AMDL |
FIRST END DIAMETER |
0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
4.830 INCHES MINIMUM AND 4.850 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES |
| AMDS |
FIRST END PITCH DIAMETER |
0.4344 INCHES NOMINAL |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
0.3659 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AMFZ |
SECOND END DIAMETER |
0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ATPC |
STEP QUANTITY |
4 |
| AMGE |
SECOND END PRESSURE ANGLE |
30.0 DEGREES NOMINAL |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |