| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNC SECOND END, SIXTH PORTION |
| CFFQ |
WORM BODY TAPERED BEARING SURFACE END |
NOT PROVIDED |
| CFFN |
WORM THREAD SECTION LENGTH |
0.944 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| BYFR |
TEETH HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.370 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFK |
WORM OUTSIDE DIAMETER |
0.622 INCHES NOMINAL |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.160 INCHES NOMINAL SECOND END, THIRD PORTION |
| MATL |
MATERIAL |
STEEL |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.811 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.047 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFF |
WORM PRESSURE ANGLE IN DEG |
29.000 |
| CFFP |
WORM BODY LENGTH |
1.000 INCHES NOMINAL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.2504 INCHES NOMINAL SECOND END, FIFTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.462 INCHES NOMINAL SECOND END, SECOND PORTION |
| CFFG |
WORM HELIX ANGLE |
5 DEG 52 MIN |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.730 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFB |
WORM THREAD QUANTITY |
1 |
| CFFC |
WORM THREAD LEAD |
0.1666 INCHES NOMINAL |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.853 INCHES NOMINAL SECOND END, FIFTH PORTION |
| SURF |
SURFACE TREATMENT |
PASSIVATED |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.375 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.047 INCHES NOMINAL SECOND END, FOURTH PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.340 INCHES NOMINAL SECOND END, THIRD PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.245 INCHES NOMINAL SECOND END, FOURTH PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.625 INCHES NOMINAL SECOND END, SECOND PORTION |
| CFFD |
WORM THREAD DIRECTION |
LEFT-HAND |
| CFGC |
UNTHREADED SECTION PIN HOLE DIAMETER |
0.1090 INCHES NOMINAL SECOND END, FIFTH PORTION |
| ABHP |
OVERALL LENGTH |
4.110 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
TELESCOPE,ELBOW,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT |
| AKAF |
SHAFT THREAD DIRECTION |
RIGHT-HAND SECOND END, SIXTH PORTION |
| CFFM |
SHAFT HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM |
| AASA |
THREAD LENGTH |
0.313 INCHES NOMINAL SECOND END, SIXTH PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
0.344 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFL |
WORM PITCH DIAMETER |
0.518 INCHES NOMINAL |
| CFFW |
SHAFT LOCATION |
BOTH ENDS OF WORM |