| AXYS |
SPLINE TYPE |
INVOLUTE BOTH ENDS |
| BPPL |
WRENCHING FACILITY TYPE |
KNURLED SURFACE BOTH ENDS |
| AWZY |
END CONNECTION TYPE |
THREADED INTERNAL BOTH ENDS |
| ABUJ |
THREAD SIZE (NON-CORE) |
ERR-070 |
| APJC |
THREAD LOCATION |
INTERNAL BOTH ENDS |
| CFRZ |
CORE OVERALL LENGTH |
142.000 INCHES NOMINAL |
| CFRQ |
CASING OUTSIDE DIAMETER |
0.335 INCHES MAXIMUM |
| ADMS |
WRENCHING FACILITY OUTSIDE DIAMETER |
0.750 INCHES NOMINAL BOTH ENDS |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNS BOTH ENDS |
| ABSA |
SPLINE QUANTITY |
12 BOTH ENDS |
| BJPS |
CASING MATERIAL |
STEEL |
| CFRN |
CASING SURFACE TREATMENT |
ZINC COATED |
| AJXJ |
CORE MATERIAL |
STEEL |
| AECT |
THREAD DEPTH |
0.313 INCHES NOMINAL BOTH ENDS |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY CASING LENGTH BETWEEN FERRULES; CORE OVERALL LENGTH; OVERALL LENGTH |
| AGJS |
PITCH DIAMETER |
0.251 INCHES MINIMUM BOTH ENDS AND 0.255 INCHES MAXIMUM BOTH ENDS |
| AAUJ |
SPLINE MAJOR DIAMETER |
0.299 INCHES MINIMUM BOTH ENDS AND 0.303 INCHES MAXIMUM BOTH ENDS |
| ABHP |
OVERALL LENGTH |
142.000 INCHES NOMINAL |
| AKMH |
CORE DIAMETER |
0.147 INCHES MINIMUM AND 0.153 INCHES MAXIMUM |
| AEDN |
TIP LENGTH |
0.500 INCHES NOMINAL BOTH ENDS |
| CFRT |
SWIVEL END |
NOT PROVIDED BOTH ENDS |
| AXFG |
SPLINE PRESSURE ANGLE IN DEG |
14.5 BOTH ENDS |
| CFRW |
END OVERALL DIAMETER |
0.750 INCHES NOMINAL BOTH ENDS |
| AXFH |
SPLINE LENGTH |
0.250 INCHES NOMINAL BOTH ENDS |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND BOTH ENDS |
| BDRL |
SETSCREW |
NOT INCLUDED BOTH ENDS |
| CFRY |
LUBRICATION FITTING |
NOT PROVIDED BOTH ENDS |
| CFSL |
CORE REMOVABILITY |
REMOVABLE |
| CFRP |
CASING LENGTH BETWEEN FERRULES |
141.000 INCHES NOMINAL |
| CFQW |
CROSS SECTION SIZE AND LOCATION |
0.406 INCHES CLEANING WIRE ANY ACCEPTABLE BOTH ENDS |
| CFSB |
CORE ROTATION DIRECTION |
CLOCKWISE |
| APTD |
END TYPE |
ROUND, INTERNAL SPLINED BOTH ENDS |
| CFRM |
TORSIONAL DEFLECTION RATING |
7 DEG FT-LB IN. WINDING AND UNWINDING |