| MATL |
MATERIAL |
NICKEL COPPER ALUMINUM ALLOY |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
3.000 INCHES NOMINAL FIRST END, EIGHTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.750 INCHES NOMINAL FIRST END, NINTH PORTION |
| CFFF |
WORM PRESSURE ANGLE IN DEG |
14.500 |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.500 INCHES NOMINAL FIRST END, SEVENTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
1.000 INCHES NOMINAL FIRST END, EIGHTH PORTION |
| CFFW |
SHAFT LOCATION |
ONE END OF WORM |
| CFFQ |
WORM BODY TAPERED BEARING SURFACE END |
PROVIDED |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
4.125 INCHES NOMINAL FIRST END, SEVENTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
2.000 INCHES NOMINAL SECOND END, FIRST PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
1.850 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFZ |
UNTHREADED SECTION KEYWAY WIDTH |
0.2490 INCHES MINIMUM FIRST END, THIRD PORTION AND 0.2650 INCHES MAXIMUM FIRST END, THIRD PORTION |
| CFFK |
WORM OUTSIDE DIAMETER |
2.000 INCHES NOMINAL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
1.623 INCHES MINIMUM SECOND END, FIRST PORTION AND 1.624 INCHES MAXIMUM SECOND END, FIRST PORTION |
| CFFC |
WORM THREAD LEAD |
0.500 INCHES NOMINAL |
| CFFR |
TAPERED BEARING SURFACE LARGEST DIAMETER |
2.000 INCHES NOMINAL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
1.967 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
1.060 INCHES NOMINAL FIRST END, FOURTH PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
3.000 INCHES MINIMUM FIRST END, FOURTH PORTION AND 3.001 INCHES MAXIMUM FIRST END, FOURTH PORTION |
| CFGC |
UNTHREADED SECTION PIN HOLE DIAMETER |
0.1880 INCHES NOMINAL FIRST END, FIFTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
1.060 INCHES NOMINAL FIRST END, SIXTH PORTION |
| CFFS |
TAPERED BEARING SURFACE SMALLEST DIAMETER |
1.760 INCHES NOMINAL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
1.967 INCHES NOMINAL FIRST END, THIRD PORTION |
| AGAV |
END ITEM IDENTIFICATION |
SEAWOLF CLASS SUBMARINE SSN 23, EXTERNAL STBD TRAY HANDLING WINCH CABLE DRUM LEVEL WIND ASSEMBLY |
| CFFT |
TAPERED BEARING SURFACE LENGTH |
0.120 INCHES NOMINAL |
| AKAF |
SHAFT THREAD DIRECTION |
LEFT-HAND SECOND END, SECOND PORTION |
| CFFB |
WORM THREAD QUANTITY |
4 |
| ABHP |
OVERALL LENGTH |
36.125 INCHES NOMINAL |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
1.700 INCHES NOMINAL FIRST END, NINTH PORTION |
| CFFG |
WORM HELIX ANGLE |
14.03624 DEG |
| FEAT |
SPECIAL FEATURES |
PART NAME BY CONTROLLING AGENCY: SCREW, POWER RH. FIRST END, EIGHTH PORTION, TWO PARALLEL FLATS 2.50 ACROSS. ACME THREAD AREA 18.00 FROM FIRST END HAS 1.88 HOLE DRILLED THUR. NOTE: REFERENCING DRAWING 596-7410365-68 WILL SHOW, SCREW POWER RH, P/N B434-8212-24. FOR CORRECTION TO DRAWING REFER TO (ER) ENGINEERING REPORT ERMF02198 INDICATING DRAWING 596-7410365-68 IS NOW, SCREW POWER LH, P/N B434-8212-22. |
| CFFD |
WORM THREAD DIRECTION |
LEFT-HAND |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
3.000 INCHES MINIMUM FIRST END, SIXTH PORTION AND 3.001 INCHES MAXIMUM FIRST END, SIXTH PORTION |
| CFGB |
UNTHREADED SECTION KEYWAY DEPTH |
0.500 INCHES MINIMUM FIRST END, THIRD PORTION AND 0.502 INCHES MAXIMUM FIRST END, THIRD PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.180 INCHES NOMINAL FIRST END, SECOND PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
2.640 INCHES NOMINAL FIRST END, THIRD PORTION |
| CFFP |
WORM BODY LENGTH |
36.125 INCHES NOMINAL |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.880 INCHES NOMINAL FIRST END, FIRST PORTION |
| CFFY |
STRAIGHT UNTHREADED SECTION DIAMETER |
2.750 INCHES NOMINAL FIRST END, FIFTH PORTION |
| CFFX |
STRAIGHT UNTHREADED LENGTH |
0.250 INCHES NOMINAL FIRST END, FIFTH PORTION |