| AGYF |
RETAINER FABRICATION METHOD |
PRESSED |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGZD |
BORE SHAPE |
STRAIGHT |
| AGYE |
SURFACE FINISH |
GROUND |
| MATT |
MATERIAL |
STEEL COMP 440A OUTER RING |
| AGYK |
SHIELD QUANTITY |
1 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI 440A ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATT |
MATERIAL |
STEEL COMP 303 RETAINER OR STEEL COMP 302 RETAINER OR STEEL COMP 301 RETAINER OR STEEL COMP 304 RETAINER OR STEEL COMP 305 RETAINER |
| STYL |
STYLE DESIGNATOR |
NON-LOADING GROOVE, NON-SEPARABLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE SHIELD |
| MATT |
MATERIAL |
STEEL COMP 440A BALL |
| AGZC |
LOAD DIRECTION |
RADIAL |
| MATT |
MATERIAL |
GLASS FIBER SEAL AND PLASTIC SEAL |
| ABXV |
BORE DIAMETER |
0.3748 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGVV |
|
AND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI 440A ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AKVV |
INTERNAL CLEARANCE |
0.0003 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| FEAT |
SPECIAL FEATURES |
RIBBON RETAINER; SEAL ON THE FLANGED SIDE; SHIELD OPPOSITE THE FLANGED END |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI 440A ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| ADZG |
LUBRICATION MATERIAL |
OIL |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE |
| AGYJ |
SEAL QUANTITY |
1 |
| AEPR |
|
AND |
| AGFF |
|
AND |
| MATT |
MATERIAL |
STEEL COMP 304 SHIELD OR STEEL COMP 302 SHIELD OR STEEL COMP 303 SHIELD OR STEEL COMP 301 SHIELD OR STEEL COMP 305 SHIELD |
| MATT |
MATERIAL |
STEEL COMP 440A INNER RING |
| ABMK |
|
AND |
| CTFZ |
STANDARD TOLERANCE DESIGNATION |
ABEC NO. 7P |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE RETAINER |