| ABXV |
BORE DIAMETER |
0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AGHA |
INSPECTION HOLE CENTER TO END DISTANCE |
0.4110 INCHES NOMINAL |
| MATT |
MATERIAL |
PLASTIC TETRAFLUOROETHYLENE RACE LINER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
X1106-1 78016 MFR REF 4TH MATERIAL RESPONSE RACE LINER |
| MATT |
MATERIAL |
STEEL RACE INSERT |
| ABHP |
OVERALL LENGTH |
2.3000 INCHES NOMINAL |
| AGGY |
SHANK THREAD LENGTH |
0.7000 INCHES NOMINAL |
| AGGJ |
INNER MEMBER WIDTH |
0.8110 INCHES MINIMUM AND 0.8130 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5614 ASSN STD 3RD MATERIAL RESPONSE RACE INSERT |
| AGGF |
OUTER MEMBER OUTSIDE DIAMETER |
1.3600 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3B |
| MATT |
MATERIAL |
TITANIUM ALLOY ROD END BODY |
| AGHB |
SHANK WIDTH ACROSS WRENCH FLATS |
0.6250 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| CQFM |
HARDNESS RATING |
26.0 ROCKWELL C MINIMUM RACE INSERT AND 62.0 ROCKWELL C MAXIMUM RACE INSERT |
| MATT |
MATERIAL |
STEEL INTERNAL INNER MEMBER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5630 ASSN STD 1ST MATERIAL RESPONSE INTERNAL INNER MEMBER |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS4928 ASSN STD 2ND MATERIAL RESPONSE ROD END BODY |
| AWDP |
THREAD DIAMETER |
0.437 INCHES NOMINAL |
| AGGG |
BORE CENTER TO SHANK END DISTANCE |
1.6200 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
20 |
| AGGH |
OUTER MEMBER WIDTH |
0.3400 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE |