| AAZF |
SHANK STYLE |
EXTERNALLY THREADED |
| CQFM |
HARDNESS RATING |
55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| MATT |
MATERIAL |
PLASTIC RACE LINER |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-I-6868 SPECIFICATION |
| CQFM |
HARDNESS RATING |
39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| AGGF |
OUTER MEMBER OUTSIDE DIAMETER |
1.1860 INCHES NOMINAL |
| AGGH |
OUTER MEMBER WIDTH |
0.3750 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| MATT |
MATERIAL |
STEEL COMP E4340 ROD END BODY |
| FEAT |
SPECIAL FEATURES |
CENTIRE THD SLOTTED LONGITUDINALLY 0.0125 IN. MIN,0.1300 IN. MAX W BY 0.870 IN. MIN,0.0920 IN. MAX DEEP,THREADED END OF SHANK DRILLED LONGITUDINALLY 0.2500 IN. DIA BY 1.4840 IN,1.5050 IN. MAX DEEP |
| STYL |
STYLE DESIGNATOR |
BALL TYPE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ABHP |
OVERALL LENGTH |
3.3430 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 410 OUTER RACE MEMBER |
| AWDP |
THREAD DIAMETER |
0.750 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| SFTT |
SURFACE TREATMENT |
CADMIUM ROD END BODY |
| AGGJ |
INNER MEMBER WIDTH |
0.4040 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM |
| AGGG |
BORE CENTER TO SHANK END DISTANCE |
2.7500 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
24.0 ROCKWELL C MINIMUM OUTER RACE MEMBER AND 35.0 ROCKWELL C MAXIMUM OUTER RACE MEMBER |
| AGKP |
STATIC RADIAL LOAD RATING |
11000 POUNDS |
| SFTT |
SURFACE TREATMENT |
CHROMIUM INNER MEMBER |
| ABXV |
BORE DIAMETER |
0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGGY |
SHANK THREAD LENGTH |
1.7820 INCHES NOMINAL |