| BWMZ |
CUTTING SPEED RANGE |
+50.0/+5200.0 FEET PER MINUTE |
| FEAT |
SPECIAL FEATURES |
0ACCESSORY COMPONENTS AND QTY,FILE BAND GUIDES 1/4 IN. W,1 SET,FILE BAND GUIDES 1/2 IN. W,1 SET; BACK-UP ROLLER BEARING FOR 1/8,3/16,1/4,3/8,1/2,AND 3/4 IN. W BLADES,1 SET; JAW HOLDING 1; SHIELDED TABLE LIGHT 1; ETCHING PENCIL 1; RIP FENCE 1 |
| ALDF |
FRAME TYPE |
RIGID |
| BWLZ |
TABLE LEFT TILT ANGLE IN DEG |
10.0 |
| ARDQ |
TABLE LENGTH |
24.000 INCHES NOMINAL |
| AAXX |
MOUNTING TYPE |
FLOOR |
| ARDR |
TABLE WIDTH |
24.000 INCHES NOMINAL |
| BWNC |
INFINITE CUTTING SPEED FEATURE |
PROVIDED |
| BWMC |
BAND TYPE FOR WHICH DESIGNED |
FILE OR SAW BLADE |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
AS MODIFIED BY VOLTAGE RATING |
| AQCL |
THROAT DEPTH |
15.250 INCHES NOMINAL |
| BWNG |
BUILT-IN COOLANT SYSTEM |
NOT INCLUDED |
| AMSE |
VOLTAGE RATING |
208.000 VOLTS NOMINAL |
| ARCM |
DRIVE METHOD |
ELECTRIC MOTOR |
| FAAZ |
PHASE |
THREE |
| AQLX |
BRAKING FACILITY |
NOT INCLUDED |
| BWND |
POWER FEED FEATURE |
PROVIDED |
| BWMG |
BLADE MAXIMUM LENGTH ACCOMMODATED |
ANY ACCEPTABLE |
| BNBB |
TABLE TYPE |
TILTING |
| BWLY |
TABLE RIGHT TILT ANGLE IN DEG |
45.0 |
| AMWX |
FEED METHOD |
WORK INTO CUTTING BAND |
| BWMH |
BLADE MAXIMUM WIDTH ACCOMMODATED |
0.750 INCHES |
| AWLX |
ELECTRIC MOTOR QUANTITY |
1 |
| BWMD |
FILE MAXIMUM LENGTH ACCOMMODATED |
ANY ACCEPTABLE |
| ACDC |
CURRENT TYPE |
AC |
| BWNJ |
INTEGRAL GRINDER |
INCLUDED |
| BWML |
VISE |
NOT PROVIDED |
| BWMN |
DISTANCE BETWEEN GUIDE AND TABLE |
12.000 INCHES NOMINAL |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
16 SIZE |
| AMZE |
ROTATIONAL SPEED RATING IN RPM |
ANY ACCEPTABLE |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
ALUMINUM OXIDE ABRASIVE BAND,1 IN. W,12 EA,NO. 50,NO. 80,NO. 150; SAW BLADE GUIDE ADAPTER SET,90 DEG 1; DRIVE BELT SET 1; FLEXIBLE BACK CONVENTIONAL TOOTH SET,BAND SAW BLADE,RAKER SET,100 FT COILS PER GGG-B-421,TY 1,STYLE 1,8 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/8 14,1/8 18,1/8 24,1/4 10,1/4 18,1/4 24,1/2 6,1/2 10,2 COILS 0.032 IN. THK,3/4 10; SKIP TOOTH FLEXIBLE BACK BAND SAW BLADE,100 FT COILS PER GGG-B-421,TY 1,STYLE 2,2 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/4 6,1/2 4,1 COIL 0.032 IN. THK,3/4 3; 1 PUMP AND CHIP BLOWER,1 CIRCLE CUTTING ATTACHMENT; 1 CUT OFF-MITRE ATTACHMENT; MED CUT FLAT BASTARD FILE BANDS 1 EA 1/4 IN. W,1/2 IN. W; OVAL BASTARD FILE BAND MED CUT 1/4 IN. W BANDS 1 SET; FILE BAND GUIDES 1 SET EA FOR 1/4 IN. 1/2 IN. W BANDS; 1 SET ROLLER BACK-UP BEARING FOR 1/2,3/16,1/4,3/8,1/2,3/4 IN. W/BLADES; 1 HOLDING JAW; 1 SHIELDED TABLE LIGHT; 1 ETCHING PENCIL; 1 RIP FENCE |
| ANCY |
HORSEPOWER RATING |
1.500 |
| BWMF |
FILE MAXIMUM WIDTH ACCOMMODATED |
0.500 INCHES |
| ACZB |
FREQUENCY RATING |
60.000 HERTZ NOMINAL |
| BWNH |
INTEGRAL BUTT WELDER |
INCLUDED |