| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
30.000 INCHES |
| BNSP |
UPPER WORKING SURFACE SHAPE |
ROUND |
| BNSG |
BASE WORKING SURFACE SHAPE |
ROUND |
| BNRK |
SPINDLE SOCKET TAPER SIZE |
NO. 2 MORSE TAPER |
| AAXX |
MOUNTING TYPE |
FLOOR |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
8.000 INCHES NOMINAL |
| BNRL |
SPINDLE TRAVEL DISTANCE |
7.500 INCHES NOMINAL |
| BNRW |
BASE WORKING SURFACE LENGTH |
16.000 INCHES NOMINAL |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BTSZ |
SPINDLE SPEED QUANTITY |
4 |
| BNSF |
BASE WORKING SURFACE TYPE |
SLOTTED |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| BNSN |
UPPER WORKING SURFACE TYPE |
SLOTTED |
| AQDD |
FEED TYPE |
HAND |
| BNSH |
BASE WORKING SURFACE AREA |
ANY ACCEPTABLE |
| AJGD |
HEAD TYPE |
SLIDING |
| BNRX |
BASE WORKING SURFACE WIDTH |
14.625 INCHES NOMINAL |
| BNSQ |
UPPER WORKING SURFACE AREA |
ANY ACCEPTABLE |
| BNSY |
SWIVEL ADJUSTMENT IN DEG |
180.000 |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
1.000 |
| ELEC |
VOLTAGE IN VOLTS |
220.0 |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| ACDC |
CURRENT TYPE |
AC |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
45.000 INCHES |
| BQLR |
SPINDLE TYPE |
TAPERED SOCKET |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+425.000/+1780.000 |
| BPSX |
HEAD VERTICAL ADJUSTMENT |
8.500 INCHES NOMINAL |
| FREQ |
FREQUENCY IN HERTZ |
60.000 |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
17.000 INCHES NOMINAL |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
BASE |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
45.0 LEFT |
| FAAZ |
PHASE |
SINGLE |
| ELEC |
VOLTAGE IN VOLTS |
440.0 |
| BNSR |
UPPER WORKING SURFACE DIAMETER |
24.000 INCHES NOMINAL |
| BNRY |
DRILLING CAPABILITY |
3/4 IN. IN MILD STEEL,7/8 IN. IN CAST IRON |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
45.0 RIGHT |