| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BNSP |
UPPER WORKING SURFACE SHAPE |
RECTANGULAR |
| FREQ |
FREQUENCY IN HERTZ |
60.0 |
| BNSG |
BASE WORKING SURFACE SHAPE |
SQUARE |
| BPSX |
HEAD VERTICAL ADJUSTMENT |
11.000 INCHES NOMINAL |
| AAXX |
MOUNTING TYPE |
FLOOR |
| BNSF |
BASE WORKING SURFACE TYPE |
PLAIN W/COOLANT TROUGH |
| BNRY |
DRILLING CAPABILITY |
1.500 IN MILD STEEL |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BNSN |
UPPER WORKING SURFACE TYPE |
PLAIN W/COOLANT TROUGH |
| BNSS |
UPPER WORKING SURFACE LENGTH |
21.500 INCHES NOMINAL |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
11.625 INCHES NOMINAL |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| BNRK |
SPINDLE SOCKET TAPER SIZE |
NO. 4 MORSE TAPER |
| FAAZ |
PHASE |
THREE |
| BNRW |
BASE WORKING SURFACE LENGTH |
17.000 INCHES NOMINAL |
| BNRL |
SPINDLE TRAVEL DISTANCE |
9.250 INCHES NOMINAL |
| AQDD |
FEED TYPE |
HAND |
| BNSH |
BASE WORKING SURFACE AREA |
ANY ACCEPTABLE |
| AJGD |
HEAD TYPE |
SLIDING |
| BTSZ |
SPINDLE SPEED QUANTITY |
8 |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+300.0/+2100.0 |
| BNSQ |
UPPER WORKING SURFACE AREA |
ANY ACCEPTABLE |
| BNRX |
BASE WORKING SURFACE WIDTH |
17.000 INCHES NOMINAL |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
33.750 INCHES |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
1.000 |
| ELEC |
VOLTAGE IN VOLTS |
220.0 |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
21.000 INCHES |
| ACDC |
CURRENT TYPE |
AC |
| BQLR |
SPINDLE TYPE |
TAPERED SOCKET |
| BNST |
UPPER WORKING SURFACE WIDTH |
17.250 INCHES NOMINAL |
| BNRZ |
COLUMN TYPE |
BOX |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
BASE |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
19.000 INCHES NOMINAL |