| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BNSG |
BASE WORKING SURFACE SHAPE |
RECTANGULAR |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+100.000/+1100.000 |
| BNRY |
DRILLING CAPABILITY |
2 IN. IN CAST IRON |
| BNSP |
UPPER WORKING SURFACE SHAPE |
ROUND |
| AAXX |
MOUNTING TYPE |
FLOOR |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
INCLUDED |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
PYJC,FEAT |
| BCRH |
SPINDLE QUANTITY |
1 |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE AND A STYLE AND 24 SIZE |
| ELEC |
VOLTAGE IN VOLTS |
208.000 |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| FAAZ |
PHASE |
THREE |
| BNSN |
UPPER WORKING SURFACE TYPE |
SLOTTED |
| BNSF |
BASE WORKING SURFACE TYPE |
SLOTTED W/COOLANT TROUGH |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
12.000 INCHES MINIMUM |
| BNRK |
SPINDLE SOCKET TAPER SIZE |
NO. 5,MORSE TAPER |
| BTSZ |
SPINDLE SPEED QUANTITY |
6 |
| BNSH |
BASE WORKING SURFACE AREA |
ANY ACCEPTABLE |
| AJGD |
HEAD TYPE |
SLIDING |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
CHUCK,JAW,0 TO 1/2 IN. W/KEY AND TAPER SHANK TO FIT NO. 5 MORSE TAPERSPINDLE,1; DRIFTS,DRILL,MORSE TAPERSHANK HIGH SPEED TWIST,NO. 2,3,4,5,1; DRILL SET 1/8 IN. TO 1/2 IN. BY 1/64 IN. INCREMENTS STRAIGHT SHANK,HIGH SPEED TWIST DRILLS,2 SETS; DRILLSET,1/2 IN. TO 1 IN. BY 1/16 IN. INCREMENTS,MORSE TAPER SHANK,HIGH SPEED TWIST DRILL,2; DRILL SET,1 IN.TO 2 IN. BY 1/8 IN. INCREMENTS,MORSE TAPER SHANK,HIGH SPEED TWIST DRILL,2SETS; SLEEVE,REDUCING NO. 5 TO NO.4 MORSE TAPER,1; SLEEVE,REDUCING NO.4 TO NO.3 MORSE TAPER,1; SLEEVE,REDUCING NO. 4 TO NO .2 MORSE TAPER,1; PUMP COLLANT,ELECTRIC DRIVEN COMPLETE,1 |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
5.000 |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
ANY ACCEPTABLE |
| BNSQ |
UPPER WORKING SURFACE AREA |
ANY ACCEPTABLE |
| FEAT |
SPECIAL FEATURES |
RIS SHALL BE IN ACCORDANCE WITH MIL-T-11748 |
| BNSY |
SWIVEL ADJUSTMENT IN DEG |
180.000 |
| BNRX |
BASE WORKING SURFACE WIDTH |
20.000 INCHES MINIMUM |
| BNRW |
BASE WORKING SURFACE LENGTH |
24.000 INCHES NOMINAL |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| BNRL |
SPINDLE TRAVEL DISTANCE |
5.000 INCHES NOMINAL |
| BPSX |
HEAD VERTICAL ADJUSTMENT |
8.000 INCHES NOMINAL |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
AT BASE |
| ACDC |
CURRENT TYPE |
AC |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
45.000 INCHES |
| BQLR |
SPINDLE TYPE |
TAPERED SOCKET |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
23.000 INCHES |
| FREQ |
FREQUENCY IN HERTZ |
60.000 |
| ALBH |
RADIO INTERFERENCE SHIELDING |
PROVIDED |
| AQDD |
FEED TYPE |
POWER |
| BNSR |
UPPER WORKING SURFACE DIAMETER |
23.000 INCHES NOMINAL |