| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| ELEC |
VOLTAGE IN VOLTS |
110.000 |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNRX |
BASE WORKING SURFACE WIDTH |
10.000 INCHES NOMINAL |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
90.0 LEFT |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
90.0 RIGHT |
| BNSS |
UPPER WORKING SURFACE LENGTH |
10.000 INCHES MINIMUM |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
LOCATED ON BASE |
| BNSG |
BASE WORKING SURFACE SHAPE |
RECTANGULAR |
| AJGD |
HEAD TYPE |
RADIAL SWINGING/SLIDING |
| BNSP |
UPPER WORKING SURFACE SHAPE |
SQUARE |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
7.000 INCHES NOMINAL |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
ANY ACCEPTABLE |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+470.0/+1950.0 |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BTSZ |
SPINDLE SPEED QUANTITY |
4 |
| BNSF |
BASE WORKING SURFACE TYPE |
SLOTTED |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 CLASS AND 14 SIZE |
| BNSN |
UPPER WORKING SURFACE TYPE |
SLOTTED |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
0.333 |
| AQDD |
FEED TYPE |
HAND |
| BNSH |
BASE WORKING SURFACE AREA |
ANY ACCEPTABLE |
| BNRW |
BASE WORKING SURFACE LENGTH |
7.000 INCHES NOMINAL |
| BNSC |
DRILL CHUCK SIZE ACCOMMODATED |
1/2 IN. KEY |
| AAXX |
MOUNTING TYPE |
BENCH |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
ANY ACCEPTABLE |
| BNRL |
SPINDLE TRAVEL DISTANCE |
4.000 INCHES NOMINAL |
| BNST |
UPPER WORKING SURFACE WIDTH |
10.000 INCHES MINIMUM |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
AS MODIFIED BY DRILLING CAPABILITY,SPINDLE SPEED RANGE IN RPM,HEAD TYPE,SWIVE ADJUSTMENTIN DEG |
| BNRY |
DRILLING CAPABILITY |
1/2 IN. DRILLING CAPACITY IN CAST IRON,3/8 IN.DRILLING CAPACITY IN STEEL |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
ANY ACCEPTABLE |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
1 CORD,15 FT LG,1 CORD GRIP PLUG,POLARIZED 3 POLE |
| BQLR |
SPINDLE TYPE |
SOLID MALE TAPERED FOR DRILL CHUCK |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| BNSY |
SWIVEL ADJUSTMENT IN DEG |
360.000 |
| ACDC |
CURRENT TYPE |
AC |
| FREQ |
FREQUENCY IN HERTZ |
60.000 |
| FAAZ |
PHASE |
SINGLE |
| BPSX |
HEAD VERTICAL ADJUSTMENT |
ANY ACCEPTABLE |