| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNRY |
DRILLING CAPABILITY |
5/16 IN. DRILLINGCAPACITY IN MILD STEEL |
| BNSP |
UPPER WORKING SURFACE SHAPE |
RECTANGULAR |
| FREQ |
FREQUENCY IN HERTZ |
60.0 |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
10.875 INCHES |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
5.875 INCHES NOMINAL |
| BWJT |
INTERMEDIATE WORKING SURFACE DIAMETER |
5.500 INCHES MINIMUM |
| BNRL |
SPINDLE TRAVEL DISTANCE |
2.375 INCHES NOMINAL |
| BNSG |
BASE WORKING SURFACE SHAPE |
ROUND |
| ELEC |
VOLTAGE IN VOLTS |
110.0 |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
NOT INCLUDED |
| BNSH |
BASE WORKING SURFACE AREA |
23.748 SQUARE INCHES |
| BNSF |
BASE WORKING SURFACE TYPE |
PLAIN |
| BNSN |
UPPER WORKING SURFACE TYPE |
PLAIN |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
EXTENSION CORD,1 |
| BWJW |
INTERMEDIATE WORKING SURFACE HEIGHT |
ANY ACCEPTABLE |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
0.250 |
| BWKB |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO INTERMEDIATE WORKING SURFACE |
8.750 INCHES |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BTSZ |
SPINDLE SPEED QUANTITY |
4 |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| BWJZ |
INTERMEDIATE WORKING SURFACE MOUNTING LOCATION |
BASE |
| AQDD |
FEED TYPE |
HAND |
| BNSQ |
UPPER WORKING SURFACE AREA |
80.500 SQUARE INCHES |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+750.0/+6000.0 |
| AJGD |
HEAD TYPE |
SLIDING |
| AAXX |
MOUNTING TYPE |
BENCH |
| BWJR |
INTERMEDIATE WORKING SURFACE SHAPE |
ROUND |
| BWJQ |
INTERMEDIATE WORKING SURFACE TYPE |
PLAIN |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
ANY ACCEPTABLE |
| BPSX |
HEAD VERTICAL ADJUSTMENT |
8.000 INCHES MINIMUM |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
B STYLE AND 2 CLASS AND 1 SIZE AND II TYPE |
| ACDC |
CURRENT TYPE |
AC |
| BNSC |
DRILL CHUCK SIZE ACCOMMODATED |
5/16 IN. KEY |
| BQLR |
SPINDLE TYPE |
THREADED END FOR DRILL CHUCK |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
BASE |
| FAAZ |
PHASE |
SINGLE |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
OVER ROUND TABLE SURFACE |