| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
90.0 LEFT |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BNSP |
UPPER WORKING SURFACE SHAPE |
RECTANGULAR |
| FREQ |
FREQUENCY IN HERTZ |
60.0 |
| BNSH |
BASE WORKING SURFACE AREA |
219.000 SQUARE INCHES |
| BNSG |
BASE WORKING SURFACE SHAPE |
RECTANGULAR |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+700.0/+4250.0 |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
34.750 INCHES NOMINAL |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
10.250 INCHES NOMINAL |
| AAXX |
MOUNTING TYPE |
FLOOR |
| BNSS |
UPPER WORKING SURFACE LENGTH |
14.000 INCHES NOMINAL |
| BNRX |
BASE WORKING SURFACE WIDTH |
13.500 INCHES NOMINAL |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
34.750 INCHES |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BNRW |
BASE WORKING SURFACE LENGTH |
16.250 INCHES NOMINAL |
| BNSQ |
UPPER WORKING SURFACE AREA |
154.000 SQUARE INCHES |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| FAAZ |
PHASE |
THREE |
| BNRY |
DRILLING CAPABILITY |
11/16 IN. DRILLING CAPACITY IN MILD STEEL |
| AJGD |
HEAD TYPE |
FIXED |
| BTSZ |
SPINDLE SPEED QUANTITY |
5 |
| AQDD |
FEED TYPE |
HAND |
| BNSN |
UPPER WORKING SURFACE TYPE |
SLOTTED W/CENTER HOLE |
| BNSF |
BASE WORKING SURFACE TYPE |
TEE SLOTTED |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
BELT AND PULLEY GUARD 1,BELT AND MOTOR PULLEY (7/8 IN. BORE) 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,MOTOR 1 CONTROLS 1,TABLE RAISING MECHANISM 1,SAFETY COLLAR FOR HEAD 1 |
| ELEC |
VOLTAGE IN VOLTS |
115.0 OR 230.0 |
| FEAT |
SPECIAL FEATURES |
24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND OVERLOAD PROTECTION (LVC). SLOTS AND SIDE LEDGES ON MODERN TABLE DESIGN MAKE CLAMPING OF WORK EASY.MACHINED FRONT APRON HAS MOUNTING HOLES. GROUND INDEX PIN ACCURATELY LOCATES TABLE AT THE LEVEL POSITION,AND AT 90 DEGREE LEFT TILT OR 90 DEGREE RIGHT TILT POSITIONS. STEEL GUARD ON DELTA 17 IN. STEP PULLEY DRILL PRESSES SWINGS UP HIGH AND BACK,WHILE THREE SPECIALLY DESIGNED SUPPORTS AND A STOP HOLD GUARD IN DESIRED "UP" POSITION. WITH ALL INTERFERENCE PRACTICALLY ELIMINATED,OPERATOR MAKES BELT AND SPEED CHANGES QUICKLY. BUILT-IN CLIPS AUTOMATICALLY LOCK GUARD IN PLACE WHEN CLOSED. |
| BNST |
UPPER WORKING SURFACE WIDTH |
11.000 INCHES NOMINAL |
| BNRK |
SPINDLE SOCKET TAPER SIZE |
2 MORSE |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| BNRL |
SPINDLE TRAVEL DISTANCE |
5.000 INCHES NOMINAL |
| ACDC |
CURRENT TYPE |
AC |
| BQLR |
SPINDLE TYPE |
TAPERED SOCKET |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
45.750 INCHES |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
COLUMN |