| BNQL |
MAIN DRIVE TYPE |
ELECTRIC MOTOR |
| BNRZ |
COLUMN TYPE |
ROUND |
| BNSZ |
TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG |
90.0 LEFT |
| BNSW |
UPPER WORKING SURFACE ADJUSTMENT FEATURE |
INCLUDED |
| BNRL |
SPINDLE TRAVEL DISTANCE |
6.000 INCHES NOMINAL |
| BNSP |
UPPER WORKING SURFACE SHAPE |
RECTANGULAR |
| FREQ |
FREQUENCY IN HERTZ |
60.0 |
| BNSH |
BASE WORKING SURFACE AREA |
219.000 SQUARE INCHES |
| BNSG |
BASE WORKING SURFACE SHAPE |
RECTANGULAR |
| BNSX |
UPPER WORKING SURFACE VERTICAL ADJUSTMENT |
34.250 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND 3-LEG OVERLOAD PROTECTION (LVC),MEIGHT BALL BEARINGS REGIDLY SUPPORT SPINDLE ON SPEED REDUCTION MODELS. TEN-SPLINE SPINDLE IS 3/4 IN. IN DIAMETER FOR GREATER TORQUE TRANSMISSION. LARGE 2 3/8 IN. DIAMETER QUILL IS SUPPORTED BY THREE PRECISION BORED LANDS IN HEAD,PROVIDING EXTRA SMOOTH TRAVEL. LONG COLUMNS PROVIDE EXTRA BIG CAPACITY FOR LARGE WORK. |
| AAXX |
MOUNTING TYPE |
FLOOR |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
RAISING MECHANISM FOR HEAD OR TABLE 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,BELT GUARD 1,BELT AND MOTOR PULLEY (SPECIFY BORE) 1,SAFETY COLLAR FOR HEAD 1,MOTOR 1,CONTROLS 1 |
| BWJP |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE |
34.250 INCHES |
| BNRX |
BASE WORKING SURFACE WIDTH |
13.500 INCHES NOMINAL |
| BNSS |
UPPER WORKING SURFACE LENGTH |
18.000 INCHES NOMINAL |
| AKSQ |
FUNGUS RESISTANT TREATMENT |
NOT INCLUDED |
| BCRH |
SPINDLE QUANTITY |
1 |
| BNRW |
BASE WORKING SURFACE LENGTH |
16.250 INCHES NOMINAL |
| ALYE |
ROTATION REVERSIBILITY FEATURE |
NOT INCLUDED |
| FAAZ |
PHASE |
THREE |
| BNSQ |
UPPER WORKING SURFACE AREA |
288.000 SQUARE INCHES |
| BNSD |
DISTANCE FROM SPINDLE CENTER TO COLUMN |
11.875 INCHES NOMINAL |
| AJGD |
HEAD TYPE |
FIXED |
| AQDD |
FEED TYPE |
HAND |
| BNSN |
UPPER WORKING SURFACE TYPE |
SLOTTED W/CENTER HOLE |
| BTSZ |
SPINDLE SPEED QUANTITY |
8 |
| BNSF |
BASE WORKING SURFACE TYPE |
TEE SLOTTED |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+125.0/+1400.0 |
| ELEC |
VOLTAGE IN VOLTS |
230.0 OR 460.0 |
| ALBH |
RADIO INTERFERENCE SHIELDING |
NOT PROVIDED |
| BWJN |
UPPER WORKING SURFACE MOUNTING LOCATION |
COLUMN |
| BNSM |
MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE |
44.500 INCHES |
| ACDC |
CURRENT TYPE |
AC |
| BQLR |
SPINDLE TYPE |
TAPERED SOCKET |
| BNST |
UPPER WORKING SURFACE WIDTH |
16.000 INCHES NOMINAL |
| BNRK |
SPINDLE SOCKET TAPER SIZE |
3 MORSE |
| BNRY |
DRILLING CAPABILITY |
1 IN. DRILLING CAPACITY IN MILD STEEL |
| BNSL |
BASE WORKING SURFACE MOUNTING LOCATION |
COLUMN |