3416-00-174-9171 ( 00L125 , 3416-1205-1033 )
NSN Information
| NSN | FSC | NIIN | Item Name | INC |
|---|---|---|---|---|
| 3416-00-174-9171 | 3416 | 001749171 | LATHE,ENGINE | 0313 |
NSN Features
| MRC | Parameter | Characteristics |
|---|---|---|
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| AWHA | BED TYPE | SOLID |
| BTTB | SPINDLE SPEED RANGE IN RPM | +55.0/+1400.0 |
| APGF | DESIGN TYPE | SCREW |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| BTTG | SWING OVER CROSS SLIDE | 5.750 INCHES NOMINAL |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| FAAZ | PHASE | THREE |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 ASA STANDARD |
| AAXX | MOUNTING TYPE | BENCH |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| FEAT | SPECIAL FEATURES | 72 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE^2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| BTYW | GEAR CHANGE TYPE | QUICK |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 0.75 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| BTZR | THREAD QUANTITY RANGE | +4.0/+80.0 PER INCH |
| ADQR | CENTER TO CENTER DISTANCE | 33.750 INCHES NOMINAL |
| BTTD | RATED SWING | 10.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ACDC | CURRENT TYPE | AC |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
Manufacturing Part Numbers (SKUs)
| Part SKU | Cage | Status | RNVC | RNCC | SADC | DAC | RNAAC |
|---|---|---|---|---|---|---|---|
| 00L125 | 81348 | M | 1 | 4 | 3 | BF | |
| 3416-1205-1033 | 99998 | A | 9 | 6 | 9 | PX |
Manufacturers
| Part SKU | Cage | Manufacturer | Type | Status |
|---|---|---|---|---|
| 00L125 | 81348 | FEDERAL SPECIFICATIONS | A | M |
| 3416-1205-1033 | 99998 | DEFENSE SUPPLY CENTER RICHMOND | A | A |
FLIS Identification
| PMIC | ADPE Code | CRITL Code | DEMIL Code | DEMIL INTG | NIIN Asgt | ESD | HMIC | ENAC | Schedule-B | INC |
|---|---|---|---|---|---|---|---|---|---|---|
| A | N | A | 1 | 01/01/1 | N | 0313 |
FLIS Management
| MOE | REC Rep Code | Mgmt Ctl | USC | Phrase Code | Phrase Statement |
|---|---|---|---|---|---|
| DA | MQ1L6N- | A | |||
| DN | H | 7H----9 | N | R | REFER TO NET PRICE 5910.00 |
| DR | L |
Demilitarization Codes & Management
| DML | PMI | HMIC | ADP | CC | ESDC |
|---|---|---|---|---|---|
| A | A | N | N |
Miscellaneous Management
| MOE (S_A) | SOS | AAC | QUP | UI | SLC | CIIC | RC | MCC | SVC |
|---|---|---|---|---|---|---|---|---|---|
| DA | B14 | B | 1 | EA | 0 | U | MQ1L6N- | A | |
| DR | S9R | Z | 1 | EA | 0 | U | L | ||
| DN | NRP | J | 1 | EA | 0 | U | 7H----9 | N |
Management Control Army
| MATCAT 1 | MATCAT 2 | MATCAT 3 | MATCAT 4 5 | ARC |
|---|---|---|---|---|
| M | Q | 1 | L6 | N |
Freight
| NMFC | NMFC SUB | UFC | HMC | LTL | LCL | WCC | TCC | SHC | ADC | ACC | ASH | NMF DESC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 131670 | Z | 62930 | FF | W | M | 72E | Z | 9 | A | V | Z | TOOLS PWR O/T PWR HND TOOLS |