| BTWM |
HEADSTOCK CENTER TAPER SIZE DESIGNATOR |
6 MORSE |
| FREQ |
FREQUENCY IN HERTZ |
60.0 |
| BTYR |
CARRIAGE LONGITUDINAL FEED OPERATION METHOD |
HAND AND POWER |
| AWHA |
BED TYPE |
SOLID |
| BTSZ |
SPINDLE SPEED QUANTITY |
16 |
| BTTG |
SWING OVER CROSS SLIDE |
14.000 INCHES NOMINAL |
| APGF |
DESIGN TYPE |
SCREW |
| ASHK |
ELECTRIC MOTOR HORSEPOWER RATING |
25.0 |
| ZZZY |
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS |
AS DIFFERENTIATED BY ACTUAL SWING OVER BED,CENTER TO CENTER DISTANCE,SPINDLE SPEED RANGE IN RPM,ELEC MOTOR HP RATING |
| AAXX |
MOUNTING TYPE |
FLOOR |
| BTTB |
SPINDLE SPEED RANGE IN RPM |
+6.0/+303.0 |
| BTYS |
CARRIAGE CROSS FEED OPERATION METHOD |
HAND AND POWER |
| BTZR |
THREAD QUANTITY RANGE |
+1.0/+46.0 PER INCH |
| BTTF |
ACTUAL SWING OVER BED |
27.500 INCHES NOMINAL |
| FAAZ |
PHASE |
THREE |
| BTTD |
RATED SWING |
27.000 INCHES NOMINAL |
| BTWB |
THREAD CHANGE QUANTITY |
48 |
| BTWL |
HEADSTOCK DRIVE TYPE |
GEARED HEAD |
| BTYQ |
CARRIAGE QUANTITY |
1 |
| BTYW |
GEAR CHANGE TYPE |
QUICK |
| AKYD |
ACCESSORY COMPONENTS AND QUANTITY |
3 JAW UNIVERSAL CHUCK 6 IN.; 2 CENTERS NO. 2 MT; 1 SPINDLE SLEEVE NO. 2 MT; 1 CHUCK,DRILL,NO. 2 MT; 1 STEADY REST; 1 TOOL POST |
| AWLX |
ELECTRIC MOTOR QUANTITY |
1 |
| BTYT |
CARRIAGE FEED CHANGE QUANTITY |
48 |
| ELEC |
VOLTAGE IN VOLTS |
220.0 |
| ACDC |
CURRENT TYPE |
AC |
| ADQR |
CENTER TO CENTER DISTANCE |
72.000 INCHES NOMINAL |
| AGLD |
PERFORMANCE TYPE |
HEAVY DUTY |
| BTYP |
HOLE DIAMETER THROUGH SPINDLE |
2.188 INCHES NOMINAL |
| AKSL |
PURPOSE FOR WHICH DESIGNED |
TOOLROOM |