| ADLG |
FIRST END FITTING SPEC/STD DATA |
AG-FS5100-108 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER, FRESH SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
1200.000 INCHES NOMINAL WORKING |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT |
| CMLP |
THREAD QUANTITY PER INCH |
11-1/2 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
11-1/2 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
450.0 POUNDS PER SQUARE INCH |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
AG-FS5100-108 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL, PLAIN 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
450.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ABKV |
OUTSIDE DIAMETER |
1.312 INCHES NOMINAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END |
| AARX |
INSIDE DIAMETER |
1.000 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
900.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 2ND END |