| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
FS5100-187, TYPE 2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
FS5100-108 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
450.0 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
LIGHTWEIGHT, WOVEN JACKET, ABRASION RESISTANT |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
100.000 FEET NOMINAL OVERALL |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
NUT ANODIZED, MIL-A-8625, TYPE 3, CLASS 1 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 1ST END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
FS5100-108 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ADJS |
EXTERIOR COLOR |
YELLOW |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END |
| AARX |
INSIDE DIAMETER |
1.000 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
900.0 POUNDS PER SQUARE INCH |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625, TYPE 3, CLASS 1 |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 2ND END |