| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
20 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.719 INCHES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.719 INCHES 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| ABKV |
OUTSIDE DIAMETER |
0.550 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| CQRB |
SEAT ANGLE |
8.5 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQRB |
SEAT ANGLE |
8.5 DEGREES 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, TETRAFLUOROETHYLENE REINFORCED |
| FEAT |
SPECIAL FEATURES |
WEAPON SYSTEM ESSENTIAL |
| AARX |
INSIDE DIAMETER |
0.315 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRXX |
MEASURING METHOD AND LENGTH |
12.250 INCHES NOMINAL WORKING |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR SINGLE RESPONSE AND HYDRAULIC FLUID SINGLE RESPONSE |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CMLP |
THREAD QUANTITY PER INCH |
20 1ST END |