| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 375.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| AGFF |
FLANGE WIDTH |
2.375 INCHES NOMINAL 1ST END |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED,ACES 16. FSCM 00624 |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 1ST END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
52.0 |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.812 INCHES NOMINAL 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.656 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SPLIT 1ST END |
| FEAT |
SPECIAL FEATURES |
BRAIDED FIRE SLEEVE, NON-ASBESTOS |
| AKUT |
END FLANGE CONSTRUCTION |
SPLIT 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
1.156 INCHES NOMINAL |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
FLANGE,NIPPLE AND SOCKET PASSIVATED,ACES /6-FSCM00624 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.500 INCHES |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
FLANGE,NIPPLE AND SOCKET PASSIVATED,ACES 16-FSCM0062 |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AFQN |
FLANGE LENGTH |
2.188 INCHES NOMINAL 2ND END |
| CRFY |
FLOW ANGLE |
131.4 DEGREES 2ND END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 00624 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984;THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQBD |
BURST TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| AFQN |
FLANGE LENGTH |
2.375 INCHES NOMINAL 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.656 INCHES NOMINAL 2ND END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES NOMINAL 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
21.625 INCHES MINIMUM WORKING AND 22.125 INCHES MAXIMUM WORKING |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES NOMINAL 2ND END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.812 INCHES NOMINAL 1ST END |
| AGFF |
FLANGE WIDTH |
2.188 INCHES NOMINAL 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |