| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| ZZZV |
FSC APPLICATION DATA |
HYDRAULIC INSTALLATION,AIRCRAFT ENGINE BAY |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| AARX |
INSIDE DIAMETER |
0.391 INCHES MINIMUM |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 304/SAE 30304 OR COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 OR COMPLETE FITTING STEEL, FED STD 66, AISI 347/SAE 30347 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81343-AS622 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 2ND END |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE AS604,SIZE 8-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND LIGHT RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND INCOMBUSTIBLE AND FIRE RETARDANT AND OZONE RESISTANT |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 OR COMPLETE FITTING STEEL, FED STD 66, AISI 304/SAE 30304 OR COMPLETE FITTING STEEL, FED STD 66, AISI 347/SAE 30347 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
18.750 INCHES MINIMUM WORKING AND 19.250 INCHES MAXIMUM WORKING |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.750 INCHES |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 76823, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| ABKV |
OUTSIDE DIAMETER |
0.675 INCHES MINIMUM AND 0.735 INCHES MAXIMUM |