| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-11588,TYPE 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUTADIENE ACRYLONITRILE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 1 CLASS |
| ABKV |
OUTSIDE DIAMETER |
2.000 INCHES MINIMUM AND 2.062 INCHES MAXIMUM |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS27021-9 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABJH |
TEMP RATING |
-32.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-11588 GOVERNMENT SPECIFICATION |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
INTERNAL QUICK DISCONNECT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (EXTERNAL) 2ND END |
| FEAT |
SPECIAL FEATURES |
SUPPLIED W/DUST CAP MS27028-9,DUST PLUG MS27029-9,FOUR GASKETS MS27030-5 AND FOUR 1-1/2 IN. FLAT CRES HOSE CLAMPS |
| CQBD |
BURST TEST PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 OR ERR-070 |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (INTERNAL) 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
1.500 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
1.500 INCHES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT AND ABRASION RESISTANT AND FUEL RESISTANT |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS27025-9 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRXX |
MEASURING METHOD AND LENGTH |
300.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-601, ALLOY 356, TEMPER T6 |