| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| AAJD |
THREAD CLASS |
1A 2ND END |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| CQBD |
BURST TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL BOSS 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AHNC |
CONNECTION STYLE |
EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.125 INCHES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.500 INCHES NOMINAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND OZONE RESISTANT |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
12.000 INCHES NOMINAL OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 2ND END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.250 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| CRSM |
VACUUM IN TORR |
254.0 |
| AHNC |
CONNECTION STYLE |
PLAIN 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
625.0 POUNDS PER SQUARE INCH |