| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQJX |
NOMINAL THREAD SIZE |
4.000 INCHES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
4.000 INCHES 2ND END |
| AARX |
INSIDE DIAMETER |
4.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FOR USE ON A GASOLINE OR JET FUEL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 1ST END |
| ABKV |
OUTSIDE DIAMETER |
4.875 INCHES NOMINAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER HELIX WIRE COIL ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGM |
MAXIMUM OPERATING PRESSURE |
175.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRALLY WRAPPED DUCK, RUBBER IMPREGNATED ERR-100 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 2ND END |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJS |
EXTERIOR COLOR |
BLACK |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL PIPE 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-26894C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
350.0 POUNDS PER SQUARE INCH |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
180.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CQBD |
BURST TEST PRESSURE |
700.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |