| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
HYDRAULIC SOLUTION RESISTANT AND FUEL RESISTANT AND OZONE RESISTANT |
| AAJD |
THREAD CLASS |
2B 2ND END AND 2A 2ND END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING DICHROMATE |
| AARX |
INSIDE DIAMETER |
0.125 INCHES NOMINAL |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING DICHROMATE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL SPRING GUARD, ROUND STEEL COIL |
| CMLP |
THREAD QUANTITY PER INCH |
24 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13719 GOVERNMENT SPECIFICATION |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 1ST END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, CHLOROPRENE |
| CRXX |
MEASURING METHOD AND LENGTH |
22.000 INCHES NOMINAL WORKING |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AHNC |
CONNECTION STYLE |
FLARED 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-13719 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ZZZX |
DEPARTURE FROM CITED DESIGNATOR |
AS MODIFIED BY EXTERNAL SUPPORT |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE |
| ABKV |
OUTSIDE DIAMETER |
0.328 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 2ND END AND UNF 2ND END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| AAJD |
THREAD CLASS |
2A 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 2ND END AND 0.625 INCHES 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL AND EXTERNAL TUBE 2ND END |