| CRXX |
MEASURING METHOD AND LENGTH |
120.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-28596 GOVERNMENT SPECIFICATION |
| MEDA |
MEDIA FOR WHICH DESIGNED |
STEAM SINGLE RESPONSE |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MIL-H-52705 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| CQBD |
BURST TEST PRESSURE |
875.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 2ND END |
| FEAT |
SPECIAL FEATURES |
COUPLINGS ATTACHED BY 4 BOLT FINGER TYPE CLAMPS |
| CQGM |
MAXIMUM OPERATING PRESSURE |
75.0 POUNDS PER SQUARE INCH |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, SYNTHETIC ERR-100 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE 2ND END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MIL-H-52705 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.500 INCHES NOMINAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 2ND END |