| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
24 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.406 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.125 INCHES 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| AARX |
INSIDE DIAMETER |
0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| CRXX |
MEASURING METHOD AND LENGTH |
13.880 INCHES MINIMUM OVERALL AND 14.120 INCHES MAXIMUM OVERALL |
| AAJD |
THREAD CLASS |
2A 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
650.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CMLP |
THREAD QUANTITY PER INCH |
27 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND FUEL RESISTANT AND WATER RESISTANT |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQBD |
BURST TEST PRESSURE |
1600.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE 30R3 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |