| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQGM |
MAXIMUM OPERATING PRESSURE |
125.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.750 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CWBZ |
SEAT NOMINAL RADIUS |
0.196 INCHES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GAS 1ST END |
| AARX |
INSIDE DIAMETER |
0.188 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GAS 2ND END |
| CWBZ |
SEAT NOMINAL RADIUS |
0.099 INCHES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
FED ZZH461 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
LEFT-HAND 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-ZZ-H-461 GOVERNMENT SPECIFICATION |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, NATURAL OR RUBBER, SYNTHETIC |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
ACETYLENE SINGLE RESPONSE AND HYDROGEN SINGLE RESPONSE |
| ABKV |
OUTSIDE DIAMETER |
0.437 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
LEFT-HAND 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, NATURAL ERR-100 OR OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| MARK |
SPECIAL MARKINGS |
ACET-HYD |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJS |
EXTERIOR COLOR |
RED |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBD |
BURST TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
A STYLE |
| CRXX |
MEASURING METHOD AND LENGTH |
180.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END |